Redpine Signals device on my network
Redpine Signals was a wireless chip company, with engineering in Hyderabad, India, whose Wi-Fi and Bluetooth business was bought by Silicon Labs in 2020.
What Redpine Signals makes
Redpine designed low-power Wi-Fi and Bluetooth chips and modules for battery-powered connected devices. They were used mainly in industrial, medical and IoT equipment rather than in phones or laptops, and the technology continues in Silicon Labs' Wi-Fi products.
What a Redpine Signals device on your network probably is
Most likely a battery-powered or low-power connected gadget such as a sensor, smart-home device or a piece of specialist equipment. It is unlikely to be a phone, computer or TV.
How to find which Redpine Signals device it is
Unplug or power off low-power gadgets one at a time and watch for the entry to disappear. Check the companion app of any sensor, smart lock or hub for a MAC address in its device details. Consider whether it appeared around when a new device was set up.
Is a Redpine Signals device on my Wi-Fi a security risk?
Nothing suggests a problem on its own; Redpine is simply the radio maker. The name is rare on home networks, so if nothing you own matches, keep narrowing down by unplugging devices before assuming anything.
Questions people ask about Redpine Signals
What is Redpine Signals on my Wi-Fi?
It is the Wi-Fi chip inside a low-power connected device. Redpine made radios for battery-powered sensors, medical and industrial equipment and some smart-home products. Silicon Labs bought that business in 2020 and still sells the chip line, so similar devices may show either name. Think about specialist or battery-powered gear in the home, including anything an installer fitted.
Why does a Redpine device keep appearing and disappearing on my network?
Redpine chips were designed for products that spend most of their time asleep to save battery, such as sensors and smart locks. Some wake up, connect, send a reading and drop off again, so they flicker in and out of the router list. Noting when the entry appears and comparing that with a device's reporting schedule often narrows it down.
Redpine Signals's registered MAC address prefixes
The first half of a hardware address names the block it came from. If the start of the address in your router matches one below, the radio inside came from Redpine Signals. These are all 3 blocks registered to Redpine Signals. Paste the full address into the MAC vendor lookup to check it against every registered block.